??新金沙线上娱乐??

Contact Us
Search Search

Installation precautions of pure water intelligent turbine flowmeter

Installation precautions of pure water intelligent turbine flowmeter

The smart turbine flowmeter is installed to work properly.
The installation precautions of the smart turbine flow meter are as follows:

、安装时要注意顺流安装,即安装的方向和液体流动的方向是一致的,体现为流动方向和传感器上的感应箭头方向一致 1. Pay attention to downstream installation during installation, that is, the installation direction and the direction of liquid flow are the same, which is reflected in that the flow direction is consistent with the direction of the induction arrow on the sensor

、安装时要考虑到上下游的液体流速,因此上游接入的管道口要稍大些,一般会要求大于20dn ,下游的管道也可不过小,至少要保证液体的正常流通,需大于5dn 2. The upstream and downstream liquid flow rates must be taken into account during installation. Therefore, the pipe openings connected upstream must be slightly larger, and generally require more than 20dn , and the downstream pipes can not be too small. At least the normal flow of liquid must be ensured.

、安装的传感器要远离周边可能的干扰源,如外界磁场等等,或者干脆采取过滤外界的干扰,给传感器加一层防护罩 3. Install the sensor away from possible sources of interference, such as external magnetic fields, or simply filter the external interference and add a protective cover to the sensor

、传感器尽量不要露天安装着,容易进水,如果无法避免需要露天安装的话,需要在传感器的放大器插头处进行防水处理 4. The sensor should not be installed in the open air as much as possible, and it is easy to enter the water. If it is unavoidable to install in the open air, the sensor's amplifier plug needs to be waterproofed.

、传感器的数据接收线路需根据接收端的情况进行选择,以能够完善的接收到数据为主。 5. The data receiving line of the sensor needs to be selected according to the situation of the receiving end, mainly to be able to receive the data perfectly.

七乐彩 欢乐拼三张 新金沙线上娱乐 欢乐拼三张